Taraud für Modell Taraud M4

Winch allowing to descend and go up 2 anchors. Supplied with the electric motor and the control servo. Food under 6 volts. Length: 130mm. Width: 60mm. Height: 60mm.\n1269/5000\nComplete kit of a functional guindeau This electric anchor winch allows an anchor of your ship model to fall freely and to lift slowly. The anchor winch can be built with one or two winch drums. The 2 -drum version is planned for the simultaneous drop and lifting of anchors thanks to two anchors. In the version with the large single -piece drum, longer or thicker anchoring chains can be used. This is controlled via a proportional channel with a servo which keeps the frame in zero position, draws the frame in one direction and disengage the motorcycle in the other direction. A friction clutch guarantees that when an anchor is hung or high, nothing can occur if the engine is not stopped. In your ship model, the winch is mounted under the bridge. It can also be used for other wind activities on ships of ships. The winch is delivered as an assembly kit and is finished in 2-3 hours. It consists of plastic parts, a motorcycle, a servo, switches, parts for clutch and all screws, small parts and installation instructions. Technical specifications: Outstanding width 60 mm Length 130 mm Height 60 mm Weight CPL. About 140 g 6V service voltage The anchor winch kit with the reference no. 63512 replaces the anchor winners with the command numbers 65210 and 65211.